Searching For Your Code - Radio Shack Univer 15-2138 Owner's Manual

RS 8in1 Kameleon OM rev
a. Press VCR once.
b. Using the number keys, enter the four-digit VCR code for your
DVD Player/VCR Combo. If performed correctly, the bottom
IR segment will flash twice.
c. Press OK once. The bottom IR segment displays one long flash.
NOTE: If a VCR setup code is not listed, you can use the VCR key to program a
separate VCR or another device (see "Reassigning Device Keys" on page 35).
8. To exit programming, press
selected device menu screen. For future reference, write the working
code in the below boxes:
DVD Player/VCR Code:
Brand Name:________________________________
VCR Code (if used):
Brand Name:________________________________

SEARCHING FOR YOUR CODE

If your device does not respond to the RadioShack 8-in-One Remote
after trying all codes listed for your brand, or if your brand is not listed
at all, try searching for your code.
NOTE: Before performing a code search for a CD or DVD player or a VCR, turn
on the device and insert the required media.
For example, to search for a code for your TV:
1. Press and hold P until the bottom IR segment flashes twice.
The program keys will appear:
2. Press above SEARCH once.The Search Codes programming screen
will appear:
Programming A DVD Player-VCR Combo/Searching For Your Code 17
10/9/03 4:11 PM Page 17
O '
WNER S
twice. The display returns to the last-
continued on next page...
M
ANUAL