External Supply (Fan-Fold) - Intermec EasyCoder PM4i User Manual

Chapter 4—Media Load

External Supply (Fan-fold)

The EasyCoder PM4i Compact can print on labels, tickets, tags, and
continuous stock in various forms. This section describes the case when
the media supply is placed behind the printer, usually in the form of
fan-folded tickets or tags. External supply can be used with tear-off
(straight-through) and cut-off printing.
Although it is possible to simply feed the media through the hole in
the rear part of the side door and directly to the print mechanism, we
strongly recommend using a printer fitted with a special fan-fold guide as
illustrated below. Not only does it make media loading much easier, but
it also guides the media with great accuracy. The fan-fold guide can be
adjusted for various media widths down to 40 mm (1.57 inches).
When using an external media supply, take care to protect the media
from dust, dirt or other foreign particles, that can impair the printout
quality or cause unnecessary wear to the printhead.
Depending on brand and quality, all direct thermal media are more or
less sensitive to heat, direct sunlight, moisture, oil, plasticizers, fat, and
other substances. Protect the media accordingly.
This illustration shows the media path when using a fan-fold guide.
Intermec EasyCoder PM4i—User's Guide (Fingerprint version)