Loading Media From An External Supply - Intermec PF8d User Manual

Chapter 1 — Using the PF8 Printers

Loading Media From an External Supply

26
Routing the Liner Inside the Cut-off Mechanism for the PF8t
8 On the PF8d, close the top cover. On the PF8t continue with
"Loading Thermal Transfer Ribbon (PF8t Only)" on page
Note: If you are loading media for the first time or changing from
another type or size of media, you need to adjust the label gap sensor.
For help, see "Adjusting the Label Gap Sensor" on page
You can place the media supply, such as fanfold tickets or tags, behind
the printer.
To load media from an external supply
• Insert the media through the slot in the back of the printer. You
do not use the spindle.
Follow the instructions for the type of media you are using.
Note: Make sure to protect the media from direct sunlight and from
dust, dirt, or other foreign particles that can impair the printout
quality or cause unnecessary wear to the printhead.
Print mechanism
PF8d and PF8t Desktop Printer User's Guide
27.
58.