Controls And Indicators; Indicator Lamps - Intermec EasyCoder PM4i User Manual

Controls and Indicators

The EasyCoder PM4i has several ways of communicating directly with
its operator: three colored indicator lamps, a display window, a mem-
brane-switch keyboard with 23 programmable keys and buttons on the
printer's front, and a beeper.

Indicator Lamps

The indicators are colored LEDs (Light Emitting Diodes) and are used
for the following purposes:
Power (solid green) indicates that the power is on.
Status (solid green) indicates that the printer is ready for use.
Status (flashing green) indicates that the printer is communicating.
Status (solid red) indicates an error condition (see Chapter 10).
Intermec Ready-to-Work™ (blue; on, blink, or off).
Represented by a blue light on Intermec handheld computers, access
points, and printers, the Ready-to-Work indicator is part of an exclu-
sive monitoring system from Intermec. The Ready-to-Work indicator
helps users quickly determine the readiness of the Intermec device
individually and as part of a solution. The Ready-to-Work indicator
has three different states: On, Blinking, and Off. When the Indicator
is off, the device is not ready to operate individually or as part of a
solution. When the Indicator is blinking, the device may be initial-
izing, waiting for external resources, or in need of user attention.
And when the Indicator is On, the device is ready for use as part of a
solution. Also see Chapter 10.
Intermec EasyCoder PM4i—User's Guide (Fingerprint version)
Chapter —Installation