CONTROLS
ENGINE SWITCH
To start and stop the engine.
Key position:
OFF:
To stop the engine. Key can be removed/inserted.
ON:
To run the engine after starting.
START: To start the engine by operating the starter motor.
ENGINE SWITCH
Return the key to the ON position once the engine has started. Do not
use the starter for more than 5 seconds at a time. If the engine fails to
start, release the switch and wait
10 seconds before operating the
starter again.
RECOIL STARTER
To start the engine, pull the starter grip lightly until resistance is felt,
then pull briskly.
Do not allow the starter grip to snap back against the engine. Return
it gently to prevent damage to the starter.
12