Setting The Time Zone - Grundig G6 AVIATOR Owner's Manual

DELETING THE CONTENTS OF ALL
MEMORY PAGES
1. Turn the G6 off.
2. Do a long press on the numeric keypad numbers 0, 9 and
O.
RST
appears in the display.
3. Press the RESET button with a paper clip.
LABELING MEMORY PAGES
Memory pages can be uniquely labeled with four, intermixed digits
or letters.
1. With the G6 turned on, select memory mode with the PAGE/
TIME button. MEMO appears in the display.
2. Use the AUTO
t ..
buttons to select the desired memory page.
3. Press the EDIT button until'_' appears, blinking in the display
(about 3 seconds).
4. Use the tuning knob to select the desired number, letter, quota-
tion mark or symbol.
5. Press the PAGEITIME button to select the next '_'.
6. Repeat until 4 letters/numbers are selected.
7. Press PAGEITIME when finished.
SETTING THE TIME ZONE
(Use this same procedure to change your time zone when
traveling).
1. With the G6 turned off, press the numeric keypad #8 button
until you see a time zone abbreviation in the display and 'Tzone'
appears on the left side.
2. Do quick, sequential presses on the 8 button, or use the tuning
knob to tune to different time zones (see the chart below).
3. Press the PAGEITIME button once you've selected your time zone
or wait about 8 seconds and it will enter itself.
13