7 CLOCK
7.1 HOME/DUAL time display Priority
Your G-2000A allows you to set two different times: HOME and
DUAL. Normally, the HOME time has priority. You can also set the
DUAL time to be displayed constantly.
The MODE button toggles the display between HOME, DUAL
•
and ALARM time indication. After 5 seconds, the display will
return to the previous indication.
Press MODE once. The DUAL time appears and the DUAL
•
indication starts flashing.
Press MEMO/TIME SET to display the dual time constantly.
•
DUAL stops flashing.
•
To display the home time constantly again, press MODE twice
•
and then MEMO/TIME SET while HOME is flashing.
7.2 Setting the current time (HOME or DUAL)
Press MODE to set the display in HOME or DUAL time mode.
•
Press MEMO/TIME SET.
•
The time digits start flashing.
•
Use the H button to set the hours and the M
•
the minutes.
A single press of the H
•
by 1 hour or 1 minute respectively. If the button is held
pressed, the setting advances rapidly.
The minutes will not be carried over to the hours if, for
•
example, the minutes indication changes from '59' to 100'.
Press MEMO/TIME SET to store the setting
•
If you do not press MEMO/TIME SET, the display will return
•
to the previous time setting after 5 seconds.
or M
button advances the setting
15
button to set