Table of Contents
Advertisement
Chapter 8: UEFI SETUP UTILITY
8.1 Introduction
This section explains how to use the UEFI SETUP UTILITY to configure
your system. The UEFI chip on the motherboard stores the UEFI SETUP
UTILITY. You may run the UEFI SETUP UTILITY when you start up the
computer. Please press <F2> or <Del> during the Power-On-Self-Test
(POST) to enter the UEFI SETUP UTILITY, otherawise, POST will continue
with its test routines.
If you wish to enter the UEFI SETUP UTILITY after POST, restart the sys-
tem by pressing <Ctl> + <Alt> + <Delete>, or by pressing the reset button
on the system chassis. You may also restart by turning the system off and
then back on.
Because the UEFI software is constantly being updated, the following
UEFI setup screens and descriptions are for reference purpose only, and
they may not exactly match what you see on your screen.
8.1.1 UEFI Menu Bar
The top of the screen has a menu bar with the following selections:
Main
OC Tweaker
Advanced
Tool
H/W Monitor
Boot
Security
Exit
For setting system time/date information
For overclocking configurations
For advanced system configurations
Useful tools
Displays current hardware status
For configuring boot settings and boot priority
For security settings
Exit the current screen or the UEFI Setup Utility
43
Advertisement
Table of Contents
