Table of Contents
Advertisement
3.7 Server Board
Follow the steps below to install the server board to the chassis.
1. Hold the server board only by the edges.
2. Gently place the server board into the chassis. Sit the server board on the server board
tray.
3. Position the server board in the server system. Align mounting holes of the server
board to the standoff on the chassis.
4. Affix the screws clockwise into the mounting holes in all of the corners of the server
board.
1. Do not over-tighten the screws! Doing so may damage the server board.
2. Refer to the user manual of the server board you use for instructions on how to install
and remove the server board components and how to use its setup utility.
21
Advertisement
Table of Contents
