Table of Contents
Advertisement
To slide a chassis rail back into the slide rail assembly, push the blue release button toward
the rear, and simultaneously slide the chassis rail into the slide rail assembly until it is
locked and cannot be pushed further.
Attaching the Chassis Rails to the Server
1.
Position a chassis rail along one side of the chassis, and align the keyhole openings on
the chassis rail with the locating pins on the side of the chassis.
2.
Pull the chassis rail toward the front of the chassis until the chassis rail clips. Make
sure the rail is installed in the correct direction.
3.
Secure the chassis rail to the server chassis with screws.
4.
Repeat for the remaining chassis rail.
31
Advertisement
Table of Contents
