Node / Server Board Tray - ASROCK 2U4N-F Series User Manual

3.3 Node / Server Board Tray

Installing and Removing the Node / Server Board Tray
1. Press the locking tab on the side of the server board tray, and then gently pull it out
about an inch.
2. Grasp the handle on the other side of the server board tray, and gently pull it out of the
chassis.
3. Place the server board tray on a stable and antistatic surface.
4. Reverse the procedures to install the server board tray.
2
1
2U4N-F Series
1
19