Table of Contents
Advertisement
A+ SERVER 2022TG-HTRF/HIBQRF User's Manual
1-2
Serverboard Features
At the heart of the A+ SERVER 2022TG-HTRF/HIBQRF lies the H8DGT-HF/HIBQF,
a dual processor serverboard based on the AMD SR5670/SP5100 Chipset and
designed to provide maximum performance. Up to four of these serverboards can
be mounted in the SC827 chassis.
The sections below cover the main features of the H8DGT-HF/HIBQF serverboard
(see Figure 1-1 for a block diagram of the chipset).
Processors
The H8DGT-HF/HIBQF supports single or dual AMD Opteron 6100 series processors
(Socket G34 type). Please refer to the serverboard description pages on our web
site for a complete listing of supported processors (www.supermicro.com).
Memory
The H8DGT-HF/HIBQF has sixteen (16) single/dual/tri/quad channel DIMM slots
supporting up to 256 GB of DDR3-1333/1066/800 registered ECC or 64GB of DDR3
Unbuffered ECC/non-ECC SDRAM. See Chapter 5 for details.
Serial ATA
A Serial ATA controller is integrated into the AMD SP5100 Chipset to provide a
four-port 3 Gb/s SATA subsystem, which is RAID 0 and 1 supported. The SATA
drives are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SATA drives.
PCI Expansion Slots
The H8DGT-HF/HIBQF has one PCI Express 2.0 x16 expansion slot.
Onboard Controllers/Ports
One Fast UART 16550 compatible serial port and a Mellonox Connect-X Infi niBand
(on 2022TG-HIBQRF server only) supporting a single QSFP connector are located
on the serverboard. The color-coded I/O ports include one COM port (an additional
COM header is located on the serverboard), a VGA (monitor) port, two USB 2.0
ports (additional two internal USB headers and a USB Type A port are included on
the serverboard), an IPMI dedicated LAN port and two gigabit Ethernet ports.
1-2
Advertisement
Table of Contents
