Slave Diagnostics - Siemens Metro 21 M216KA Operator's Manual

5.2

Slave Diagnostics

In Section 5.2
Definition
ET 200L, ET 200L-SC and ET 200L-SC IM-SC Distributed I/O Device
EWA 4NEB 780 6009-02c
You will find the following topics in this section:
Section
5.2.1 General Remarks on Diagnostics
5.2.2 Structure of the Slave Diagnosis
5.2.3 Structure of Station Statuses 1 to 3, Master Station Number and
Manufacturer Identification
5.2.4 Structure of the Module Diagnosis for the ET 200L-SC
5.2.5 Structure of the Station Diagnosis for the ET 200L-SC
5.2.6 Structure of the Slave Diagnosis for Default Start-Up of the
ET 200L-SC
Diagnostics is the detection and localization of errors. The diagnostics struc-
ture is laid down in EN 50170 Volume 2, PROFIBUS. ET 200L diagnostics
complies with this standard. Slave diagnostics is explained in the section that
follows for the ET 200L.
Topic
g
Diagnostics
Page
5-6
5-7
5-8
5-10
5-13
5-15
5-5