Ap Repeater Mode - D-Link AirPremier N DAP-2310 User Manual

Hide thumbs Also See for AirPremier N DAP-2310:
Table of Contents

Advertisement

Section 3 - Configuration
Wireless Band:
2.4 GHz
Mode:
AP Repeater is selected from the pull-down menu.
Network Name
Service Set Identifier (SSID) is the name designated
(SSID):
for a specific wireless local area network (WLAN).
The SSID's factory default setting is dlink. The SSID
can be easily changed to connect to an existing
wireless network.
SSID Visibility:
This option is unavailable in AP Repeater mode.
Enabling this feature automatically selects the channel
Auto Channel
that will provide the best wireless performance. This
Selection:
feature is not supported in AP Repeater mode.
Channel:
The channel used will be displayed, and matches
the AP that the DAP-2310 is connected to when set
to AP Repeater mode.
Channel Width:
Use the pull-down menu to choose 20 MHz or Auto
20/40 MHz.
Site Survey:
Click on the Scan button to search for available wireless networks, then click on the available network that you want to connect
with.
Authentication:
Use the pull-down menu to choose Open System or WPA-Personal.
Select Open System to communicate the key across the network.
Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required.
D-Link DAP-2310 User Manual

AP Repeater mode

23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents