Ap Array - D-Link AirPremier N DAP-2310 User Manual

Section 3 - Configuration
An AP array is a set of devices on a network that are organized into a single group to increase ease of management.
Enable Array:
This check box allows the user to enable the AP array
function. The three modes that are available are Master,
Backup Master, and Slave. APs in the same array will
use the same configuration. The configuration will sync
the Master AP to the Slave AP and the Backup Master
AP when a Slave AP and a Backup Master AP join the

AP array.

AP Array Name:
Enter a name for the AP array you have created.
AP Array
Enter a password that will be used to access the AP
Password:
array you have created.
Scan AP Array
Click this button to initiate a scan of all the available
List:
APs currently on the network.
AP Array List:
This table displays the current AP array status for the
following parameters: Array Name, Master IP, MAC,
Master, Backup Master, Slave, and Total.
Current Array
This table displays all the current array members. The
Members:
DAP-2310 AP array feature supports up to eight AP
array members.
D-Link DAP-2310 User Manual
AP Array
42