Hardware Overview - D-Link AirPremier N DAP-2310 User Manual

Section 2 - Installation
Power Receptacle
The supplied power adapter connects here.
Reset Button
A pinhole button located beside the Ethernet socket is used to reset
the system or restore the factory default settings.
Note: After resetting the unit, you will still be able to access the
data on your hard drives.
LAN Port
An Ethernet port that connects the unit to a network.
D-Link DAP-2310 User Manual

Hardware Overview

Power LED
This light will be solid green when the unit is powered on.
WLAN LED
This light will be flickering green when the 2.4GHz frequency is in
use.
LAN LED
This light will be flickering green when there is active LAN traffic.
11