Basic Settings; Wireless; Access Point Mode - D-Link AirPremier N DAP-2310 User Manual

Section 3 - Configuration
Wireless Band: Select 2.4GHz from the drop-down menu.
Mode: Select Access Point from the drop-down
menu. The other three choices are WDS with
AP, WDS, and Wireless Client.
Network Name
Service Set Identifier (SSID) is the name
(SSID):
designated for a specific wireless local area
network (WLAN). The SSID's factory default
setting is dlink. The SSID can be easily
changed to connect to an existing wireless
network or to establish a new wireless network.
The SSID can be up to 32 characters and is
case-sensitive.
SSID Enable or Disable SSID visibility. Enabling
Visibility: this feature broadcasts the SSID across the
network, thus making it visible to all network
users.
Auto Channel Enabling this feature automatically selects the
channel that provides the best wireless performance. Enable is set by default. The channel selection process only occurs
Selection:
when the AP is booting up.
Channel:
All devices on the network must share the same channel. To change the channel, first toggle the Auto Channel Selection
setting to Disable, and then use the drop-down menu to make the desired selection.
Note: The wireless adapters will automatically scan and match the wireless settings.
D-Link DAP-2310 User Manual

Basic Settings

Wireless

Access Point mode

16