Ap/Repeater/Wireless Client Mode; Access Point Mode - D-Link DAP-1150 User Manual

AP/Repeater/Wireless Client Mode

How you use your DAP-1150 will determine which mode you choose on the DAP-1150. This section will help you figure
out which setting works with your setup.

Access Point Mode

In Access Point mode, the DAP-1150 acts as a central connection point for any computer (client) that has a 802.11g
or backward-compatible 802.11b wireless network adapter and is within range of the AP. Clients must use the same
SSID (wireless network name) and channel as the AP in order to connect. If wireless security is enabled on the AP,
the client will need to enter a password to connect to the AP. Multiple clients can connect to the AP at the same time
in Access Point mode.
Wireless PCs Using the DAP-1150 as a Central Connection Point
D-Link DAP-1150 User Manual 10