Ethersound Network Status Leds; Ethersound Out Port; Remote Es100 Port; Various Ethersound™ Devices Description - Yamaha Nexo NXAMP4X4 User Manual

(2) Ethersound
These four LEDs reflect the status of the Ethersound™ links. The two LEDs next to the IN
port shows that data is received from the IN port (when the top one, marked "Rx" blinks)
or are send through the IN port (when the bottom one, marked "Tx" blinks).
NB: When used with mono-directional Ethersound™ network, if no remote control
computer is connected, only the Rx LED of the IN port will blink.
The two LEDs next to the OUT port shows that data is received from the OUT port (when
the top one, marked "Rx" blinks) or are send through the OUT port (when the bottom one,
marked "Tx" blinks).
NB: When used with mono-directional Ethersound™ network, if no remote control
computer is connected, only the Tx LED of the OUT port will blink.
(3) Ethersound
This Port features an Ethercon connector. Always use this type of connector to secure your
Ethersound™ network from unwanted unplugs. This type of connector also ensures a
longer life to the internal RJ-45 contacts, because if preserves it from external traction.
Use this port as an Ethersound™ OUT port when connecting to an Ethersound™ network.

(4) Remote ES100 port

The ES100 is an upgrade of the original Ethersound™ standard. It offers new functionalities
but can also be downgraded to standard Ethersound™ network for compatibility with older
devices. See bellow for details.
This Remote ES100 port is a remote control port only that is only designed to be used with
ESmonitor, the remote control software for Ethersound™ network. Connect the PC
computer running ESmonitor to this port.
WARNING! Do not use this port if your NXAMP Powered TDcontroller is used in an
Ethersound network with some non ES-100 devices (see bellow for details).
On top of this RJ-45 plug you will find 2 LEDS: The left one is for "Link", meaning that
equipment is well connected to the plug, the right one is for "Activity" meaning that some
Ethernet frames are received on the port.
Various Ethersound™ devices description
Here is a short reminder about various Ethersound™ devices.
NXES104 EXPANSION BOARD AND REMOTE CONTROL
™
network Status LEDs
™
OUT Port
PAGE 61 OF 91