Air Compressor - Chevrolet SSR 2004 Owner's Manual

ofrecido por www.electromanuales.com
To apply the tire sealant, do the following:
1. Turn the valve cap on the tire valve
counterclockwise to remove it.
2. Remove the valve core using the valve core tool
provided in the tire inflator kit. An extra valve core
is also provided in the kit.
3. Shake the bottle to make sure the sealant is well
mixed.
4. Attach the tire sealant filling hose to the bottle of
tire sealant to pierce the seal on the bottle.
5. Remove the sealing plug from the end of the filling
hose and insert the end of the hose over the tire
valve.
6. Hold the bottle upside down over the tire valve and
squeeze the sealant into the tire until the bottle is
empty.
7. Remove the sealant filling hose from the tire valve
and reinstall the sealing plug.
8. Insert the valve core back into the tire valve. Turn
valve core tool clockwise to secure the valve core.
Once the tire sealant is applied, you can use the
compressor to inflate the tire.

Air Compressor

A. Inflating Hose
B. Air Pressure Gage
C. ON/OFF Switch
D. Air Compressor Plug
5-69