Chevrolet SSR 2004 Owner's Manual page 113

ofrecido por www.electromanuales.com
16. From the upright position, push down on the outer
area of the boot cover panel where the hinges and
hydraulic cylinders are located to separate it
from the roof tonneau. Then, continue to push the
boot cover panel down as far as it will go.
Boot cover panel down, roof tonneau up
17. Push down the roof tonneau cover. Be sure the
boot cover clears the rear roof panel.
18. Latch the tonneau panel. Pull the red cable with the
release tool until the cable is pulled tight and the
roof tonneau latch engages.
2-51