Battery Voltage Too High; Change Trans (Transmission) Fluid; Check Oil Level; Battery Voltage Too Low - Chevrolet SSR 2004 Owner's Manual

ofrecido por www.electromanuales.com

Battery Voltage Too High

This message will be displayed when the battery
voltage is higher than normal and you try to raise or
lower the convertible top. The charging system light may
also be displayed on the instrument panel cluster.
See Charging System Light on page 3-29 for more
information. Press the select button to acknowledge the
message and clear it from the DIC display.

Battery Voltage Too Low

This message will be displayed when the battery
voltage is lower than normal and you try to raise or
lower the convertible top. The charging system light may
also be displayed on the instrument panel cluster.
See Charging System Light on page 3-29 for more
information. Press the select button to acknowledge the
message and clear it from the DIC display.

Cargo Cover Ajar

This message will be displayed when trying to open or
close the convertible top while the cargo cover is
open. Make sure the cargo cover is fully closed before
trying to open or close the convertible top. This
message will clear itself from the DIC once the cargo
cover is closed.

Change Trans (Transmission) Fluid

If your transmission fluid in your vehicle needs to be
changed, this message will appear on the DIC.
See Automatic Transmission Fluid on page 5-20 and
Scheduled Maintenance on page 6-4 for more
information.

Check Oil Level

If the oil level in the vehicle is low this message will
appear on the DIC. Check the oil level and add oil as
necessary. See Engine Oil on page 5-13 for more
information. Press the select button to acknowledge this
message and clear it from the DIC display.

Depress Brake

This message will be displayed on the DIC when you try
to raise or lower the convertible top without first
pressing the brake pedal. The brake pedal must be
pressed in order to operate the convertible top.
See Convertible Top on page 2-45 for more information.
Pressing the brake pedal will clear the message, or
you can press the select button to acknowledge
and clear the message from the DIC display.
3-49