Chevrolet SSR 2004 Owner's Manual page 125

ofrecido por www.electromanuales.com
Setting Cruise Control
R
(On): Move the switch to this position to turn the
cruise control system on.
S
(Resume/Accelerate): Move the switch to this
position to resume a set speed or to accelerate.
T
(Set): Press this button, located at the end of the
lever, to set a speed.
Your cruise control is
located at the end of your
turn signal/multifunction
lever.
9 (Off): This position turns the cruise control system
off and cancels memory of a set speed.
1. Move the cruise control switch to on.
2. Get up to the speed you want.
3. Press in the set button at the end of the lever and
release it.
4. Take your foot off the accelerator pedal. The
accelerator pedal will not go down.
The Cruise light on the
instrument panel cluster
will illuminate when
the cruise control is
engaged.
3-9