Remove The Secondary Pcie Riser Cage - HP ProLiant DL385p Gen8 User Manual

Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Extend the server from the rack (on page 23).
3.
Remove the access panel (on page 25).
4.
Remove any installed full-length expansion boards.
5.
Remove the PCIe riser cage.
6.
To install the component, reverse the removal procedure.

Remove the secondary PCIe riser cage

CAUTION:
remove all AC power cords before removing or installing the PCIe riser cage.
To remove the component:
Power down the server (on page 23).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Extend the server from the rack (on page 23).
3.
Remove the access panel (on page 25).
4.
To prevent damage to the server or expansion boards, power down the server and
Operations 30