Open the cable management arm. Note that the cable management arm can be right-mounted or
2.
left-mounted.
Remove the fan cage
To remove the component:
Power down the server (on page 23).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Extend or remove the server from the rack
3.
server from the
Remove the access panel (on page 25).
4.
Remove the air baffle (on page 34).
5.
rack" on page 23).
("Remove the server from the
rack" on page 24,
"Extend the
Operations 26