Dimm Identification - HP ProLiant DL385p Gen8 User Manual

appear as a dual-rank DIMM to the system. The LRDIMM buffer also isolates the electrical loading of the
DRAM from the system to allow for faster operation. These two changes allow the system to support up to
three LRDIMMs per memory channel, providing for up to 50% greater memory capacity and higher memory
operating speed compared to quad-rank RDIMMs.

DIMM identification

To determine DIMM characteristics, use the label attached to the DIMM and the following illustration and
table.
Item Description
Size
1
Rank
2
Data width
3
Voltage rating
4
Memory speed
5
DIMM type
6
For the latest supported memory information, see the QuickSpecs on the HP website
(http://h18000.www1.hp.com/products/quickspecs/ProductBulletin.html). At the website, choose the
geographic region, and then locate the product by name or product category.
Definition
—
1R = Single-rank
2R = Dual-rank
3R = Three-rank
4R = Quad-rank
x4 = 4-bit
x8 = 8-bit
L = Low voltage (1.35V)
U = Ultra low voltage (1.25V)
Blank or omitted = Standard
12800 = 1600-MT/s
10600 = 1333-MT/s
8500 = 1066-MT/s
R = RDIMM (registered)
E = UDIMM (unbuffered with ECC)
L = LRDIMM (load reduced)
Hardware options installation 56