HP ProLiant DL385p Gen8 User Manual page 48

The processor fits one way into the socket. Use the alignment guides on the processor and socket to
12.
properly align the processor with the socket. Install the spare processor. THE PINS ON THE SYSTEM
BOARD ARE VERY FRAGILE AND EASILY DAMAGED.
CAUTION: THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED. To
avoid damage to the system board:
Never install or remove a processor without using the processor installation tool.
•
Do not touch the processor socket contacts.
•
• Do not tilt or slide the processor when lowering the processor into the socket.
Press the tabs on the processor tool to release the processor, and then remove the processor tool.
13.
Close the processor socket retaining bracket and the processor locking lever.
14.
CAUTION: Be sure to close the processor socket retaining bracket before closing the processor
locking lever. The lever should close without resistance. Forcing the lever closed can damage the
processor and socket, requiring system board replacement.
Hardware options installation 48