Dynamic Logo Tab; Multi Screen A Tab; Multi Screen B+D Tab; Multi Screen C+E Tab - Datavideo SE-2800 Instruction Manual

Dynamic Logo tab

The SE-2800 can store one dynamic moving logo in its
memory. The dynamic logo can be a targa (TGA)
sequence, GIF or AVI. It must be no longer than 75
frames/images long.
Using the Dynamic logo tab you can use the LOAD
button to browse for a logo sequence of images stored
on the computer. This logo sequence is then loaded
into the application window.
The WRITE button can then be used to save the new
logo sequence into the dynamic logo store on the
switcher.

Multi screen A tab

Multi screen B+D tab

Multi screen C+E tab

These three tabs are used to write new Multi screen layouts to the switcher in order to change the HDMI multi-view
layouts as described on page 11.
NOTE: Only change these layouts with guidance from your local Datavideo office as attempting to edit or load your
own layouts may result in a poor outcome or a non-responsive switcher.
27