Power Supply Blank; Scsi Hard Drive Blank - HP ProLiant ML570 Generation 2 Maintenance And Service Manual

Power Supply Blank

To remove a power supply blank:
1. Remove the two Torx T-15 screws securing the hot-plug power supply blank to the
chassis (1).
2. Pull the power supply blank up and away from the chassis (2).
Figure 2-58: Removing the power supply blank
Reverse steps 1 and 2 to replace a power supply blank.

SCSI Hard Drive Blank

To remove a drive blank:
1. Open the front bezel door (tower model only). Refer to "Removing the Front Bezel Door
(Tower Model Only)" in this chapter.
HP ProLiant ML570 Generation 2 Server Maintenance and Service Guide
CAUTION: Always populate power supply bays with either a power supply or blank. Proper
airflow can only be maintained when the bays are populated. Unpopulated power supply bays
can lead to improper cooling and thermal damage.
Removal and Replacement Procedures
2-67