Table of Contents
Advertisement
Removal and Replacement Procedures
3. Press the port-colored PCI-X Hot Plug button to power down the slot (1). The power
LED flashes until shutdown is complete. Refer to "PCI-X Hot Plug LEDs" in Chapter 4,
"Connectors, LEDs, and Switches," to determine the current PCI-X Hot Plug slot status.
4. When the power LED for the slot is off, remove cables to the selected expansion board.
5. Push the tab on the expansion slot latch (2).
6. Swing the latch back to unlock the expansion board (3).
Figure 2-23: Pushing the PCI-X Hot Plug button and releasing the
expansion slot latch
2-34
CAUTION: To prevent data loss, do not open an expansion slot latch when the power
LED for the slot is on.
HP ProLiant ML570 Generation 2 Server Maintenance and Service Guide
Advertisement
Table of Contents
