JVC HD-Z70RX5 Instructions Manual page 24

SET UP menu
MOVE
1 Press the 6 buttons to choose a TV channel
2 Press the 3 button to start the MOVE function
> EDIT
PR ID CH/CC
OK
STORE
3 Press the 6 buttons to choose a new programme
number (PR)
To cancel the MOVE function:
Press the b button.
4 Press the 2 button to change the programme number
(PR) of a TV channel to a new programme number (PR)
DELETE
1 Press the 6 buttons to choose a TV channel
2 Press the yellow button to delete the TV channel
The TV channel is deleted from the programme numbers (PR) list.
ID
1 Press the 6 buttons to choose a TV channel
2 Press the red button to start the ID function
3 Enter a channel name (ID). Press the 6 buttons to
choose a character. Press the 5 buttons to move the
cursor
> EDIT
PR ID
M
OK
To cancel the ID function:
Press the b button.
4 Press the a button to give a channel name to a TV
channel
Before performing INSERT operation
• A CH/CC number unique to this TV and corresponding to the
Channel number of a TV channel is required. Find the
corresponding CH/CC number from a table "Troubleshooting" on
page 26 based on the Channel number of the TV channel.
INSERT
1 Press the 6 buttons to choose a programme number
(PR) for which you will register a new TV channel
2 Press the green button to start the INSERT function
> EDIT
PR ID CH/CC
OK 0 9
CH/CC
22
CH 21
CH/CC
3 Press the 6 buttons to choose "CC" or "CH"
according to the CH/CC number of the TV channel
To cancel the INSERT function:
Press the b button.
4 Press the number buttons to enter the remaining CH/CC
number
The TV shifts to registration mode. When the registration is
completed, the picture of the TV channel appears on the screen.
• The CH/CC number is a number given to each broadcast
frequency that carries a TV channel. If the TV cannot detect the
TV channel corresponding to the broadcast frequency indicated
by the CH/CC number, a "no-signal" picture appears.
MANUAL
1 Press the 6 buttons to choose a programme number
(PR) for a new TV channel
2 Press the blue button to activate the MANUAL function
At the right side following the CH/CC number, the SYSTEM
(sound system) of the TV channel appears.
> MANUAL
PR ID CH/CC
SEARCH+
SYSTEM
OK
SEARCH-
To cancel the MANUAL function:
Press the b button.
3 Press the 3 button to choose the SYSTEM (sound
system) for a TV channel you want to register
• For the sound systems in each country or region, refer to the
table below:
Area Country or Region
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, etc.
Indonesia, Malaysia, Singapore, Thailand, India, etc.
Asia,
China, Vietnam, etc.
Middle
East Hong Kong, etc.
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
Czech Republic, Poland, etc.
Europe
Germany, Holland, Belgium, etc.
UK, etc.
Oceania Australia, New Zealand, etc.
Republic of South Africa, etc.
Africa Nigeria, etc.
Egypt, Morocco, etc.
4 Press the green or red button to search for a TV channel
Scanning stops when the TV finds a TV channel. Then the TV
channel is displayed.
5 Press the green or red button repeatedly until the TV
channel you want appears
If the TV channel reception is poor:
Press the blue or yellow button to fine-tune the TV channel.
If you cannot hear the normal sound even when the
picture of the TV channel appears normally:
The SYSTEM setting is wrong. Press the 3 button and choose a
SYSTEM that has normal sound.
6 Press the a button and register the TV channel to a
Programme number (PR)
The normal EDIT menu is resumed.
( B / G )
FINE-
FINE+
System
B/G
D/K
I
B/G
M
D/K
D/K
B/G
I
B/G
I
B/G
B/G