Colour System - JVC HD-Z70RX5 Instructions Manual

COLOUR SYSTEM

The colour system is chosen automatically. However, if the picture is
not clear or no colour appears, choose the colour system manually.
1 Choose COLOUR SYSTEM. Then press the a or 3
button
The sub-menu of the COLOUR SYSTEM function appears.
>> COLOUR SYSTEM
MAIN SUB
PAL AUTO
OK
2 Press the 5 buttons to choose MAIN or SUB
MAIN:
You can change the colour system of the main-picture.
SUB:
You can change the colour system of the sub-picture.
• Choose MAIN when a sub-picture is not displayed.
3 Press the 6 buttons to choose the appropriate colour
system. Then press the a button
PAL:
PAL system
SECAM:
SECAM system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43:
NTSC 4.43 MHz system
AUTO:
This function detects a colour system from the input signal.
• The AUTO function may not function properly if you have poor
signal quality. If the picture is abnormal in the AUTO function,
choose another colour system manually.
For colour system in your country or region, refer to the
table below:
Area Country or Region
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, etc.
Indonesia, Malaysia, Singapore, Thailand, India, etc.
Asia,
China, Vietnam, etc.
Middle
East Hong Kong, etc.
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
Czech Republic, Poland, etc.
Europe
Germany, Holland, Belgium, etc.
UK, etc.
Oceania Australia, New Zealand, etc.
Republic of South Africa, etc.
Africa Nigeria, etc.
Egypt, Morocco, etc.
4:3 AUTO ASPECT
You can choose one of three ZOOM modes, REGULAR,
PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the normal
picture (4:3 aspect ratio).
1 Choose 4:3 AUTO ASPECT then press the a button
>> 4:3 AUTO ASPECT
PANORAMIC
REGULAR
14:9 ZOOM
OK
2 Press the 6 buttons to choose a ZOOM mode
System
PAL
PAL
PAL
SECAM
NTSC
SECAM
PAL
PAL
PAL
PAL
PAL
PAL
SECAM
PICTURE menu
17