Remote Control Buttons And Functions; Turning The Tv On Or Off From Standby Mode; Choosing A Tv Channel And Watch Images From External Devices - JVC HD-Z70RX5 Instructions Manual

Remote control buttons and functions

1
2
3
4
5
6
7
8
9
0
-
=
1 Muting button
2 Number buttons
3 1 button
4 c button
5 2 button
6 4 button
7 7 buttons
8 5 button
9 6 p buttons
0 VCR/DVD/Teletext control buttons
- p buttons
= d (Favourite) button
~ # (Standby/on) button
! VCR/TV/DVD switch
@ g (Text) button
# Colour buttons
$ X (Multi) button
% f (Freeze)/c (Select) button
^ H button
& a button
* b button
( 7 q buttons
8
Turning the TV on or off from standby
mode
~
Press the # (standby/on) button to turn the TV on or off
! When the TV is turned on, the power lamp lights up blue.
• The power can be turned on by pressing the 4 button,
6 p buttons or Number buttons.
To turn the TV on or off, set the VCR/TV/DVD switch on the remote
control to the TV position and press the # button.
If the VCR/TV/DVD switch on the remote control is set to the DVD
position, the TV will not be turned on or off even if the # button
is pressed.
@
#
Choosing a TV channel and watch
$
images from external devices
%
^
Use the number buttons:
&
Enter the programme number (PR) of the channel
using the number buttons.
Example:
• PR 6 → press 6
*
• PR 12 → press 1 and 2
Use the 6 p buttons:
Press the 6 p buttons to choose the
( programme number (PR) you want or a VIDEO
terminal.
Use the 4 button:
Press the 4 button to choose a VIDEO
terminal.
Programme
numbers
PR 1 – PR 99
• The leading character is changed from V to S (eg V1 is changed to
S1) when VIDEO-1, VIDEO-2, or VIDEO-4 is connected to the S
terminal.
• If you do not have a clear picture or no colour appears, follow the
operation procedure "COLOUR SYSTEM" on page 17.
• If you cannot hear the normal sound even if the picture of the TV
channel appears normally. Follow the description "EDIT/
MANUAL" on page 21 to use the MANUAL function to change
the SYSTEM setting.
• Since this TV is designed to make full use of the resolution of the
original video source, the motion may appear unnatural when the
video source is input with progressive-scanning component
signals.
• If this happens, change the output setting of the connected device
to interlace-scanning component signal output. See the
instructions that came with the device for more information.
• The PC sound is the same as the VIDEO-3 sound.
or
or
(HDMI)
or
4