Electrical Adjustments; Equipment - Mitsubishi Electric WD-52327 Service Manual

Note: Perform only the adjustments required.
Do not attempt an alignment if proper equipment is not available.
Test Equipment
• Oscilloscope (Unless otherwise specified, use 10:1 probes)
• Signal Generator (NTSC Color Bar)
Test Signals
A. Internally Generated Square Pattern Signals
B. Color Bar Signal
Use the color bar signal shown
below, unless otherwise specified
in this manual.
40%
MODEL: WD-52327 / WD-62327

ELECTRICAL ADJUSTMENTS

100%
75%
40%
Split-Field Color Bars (100% window)
Page 20
1H