Electrical Adjustments; Equipment And Initial Setup; Models: Ws-48513 / Ws-48613 / Ws-55513 / Ws-55613 / Ws-55813 / Ws-65513 / Ws-65613 / Ws; Ws-65813 / Ws-73513 / Ws - Mitsubishi Electric WS-73513 Service Manual

MODELS: WS-48513 / WS-48613 / WS-55513 / WS-55613 / WS-55813 / WS-65513 / WS-65613 / WS-65713 /

WS-65813 / WS-73513 / WS-73713

Note: Perform only the adjustments required.
Do not attempt an alignment if proper equipment is not available.
Test Equipment
• Oscilloscope (Unless otherwise specified, use 10:1 probes)
• Signal Generator (both SD and HD capable)
• Frequency Counter
• Direct Current Voltmeter
• Direct Current Power Supply
• Multiplex Audio Signal Generator
• Direct Current Ampere Meter
Test Signal
A. Monoscope Signal
Note: If you do not have
a monoscope signal source,
connect the unit to a VCR
and play a Monoscope
*alignment tape.
(* Part Number: 859C568060)
B. Color Bar Signal
Use the color bar signal shown
below, unless otherwise specified
in this manual.
Split-Field Color Bars (100% window)

ELECTRICAL ADJUSTMENTS

Page 32
Monoscope Signal