The Microdock - E-Mu 1616 PCI Owner's Manual

Digital audio system
Hide thumbs Also See for 1616 PCI:
Table of Contents

Advertisement

The MicroDock

The MicroDock connects to the E-MU 1010 PCI card via the EDI cable.
The MicroDock provides (4) balanced analog inputs, (2) microphone preamp inputs,
(6) balanced line-level analog outputs, (3) stereo 1/8" outputs for connecting powered
computer speakers, (2) MIDI inputs, (2) MIDI outputs, a stereo headphone output, and
a RIAA equalized turntable preamp section which is "normalled" into line input 2L and
2R, 8 channels of ADAT digital input/output, and stereo S/PDIF digital input/output.
A
Line
Mic
Clip
-3
-6
SL
-12
-20
Line -
-15
Mic -
0
1L
1R
2L
In
Out
1L
1R
2L
The inputs are configured as follows:
(2)
mono microphone/line inputs (2 inputs)
(2)
stereo pairs of line level inputs (4 inputs)
(1)
stereo pair of S/PDIF/AES digital inputs (2 inputs)
(4)
stereo pairs of ADAT channels on the ADAT optical input (8 inputs)
(1)
RIAA equalized turntable preamp input allows you to connect a turntable without using
an expensive external preamp. Note: These inputs are automatically disconnected
when plugs are inserted into inputs 2L & 2R.
(2)
MIDI input ports using the supplied breakout cable
The outputs are configured as:
(3)
stereo pairs of line level outputs
(1)
stereo pair driving a stereo headphone jack (Share the same routing as Line Outs 1L/1R)
(1)
stereo pair of S/PDIF/AES digital outputs
(4)
stereo pairs of ADAT channels on the ADAT optical output
(3)
stereo 1/8" computer speaker outputs. These outputs carry the same signals as the 3
stereo line level outputs and are provided as a convenience for connecting computer or
powered speaker systems.
(2)
MIDI output ports using the supplied breakout cable
E-MU PCI Digital Audio Systems
B
Line
Mic
Clip
48V
-3
-6
SL
-12
-20
+50
-15
+50
+65
0
+65
Phono
2L
2R
2R
Gnd
3R
2R
3L
S/PDIF
In
Out
Off
MIDI Cable
Out
1
2
3
3 - PCI Card & Interfaces
f
The MicroDock is
completely "hot
pluggable"— It' s OK to
plug or unplug the
MicroDock while the
computer is turned on.
It' s a good idea to
mute MicroDock inputs 2
in the PatchMix DSP
mixer when nothing is
plugged in, since the
turntable preamp has a
very high gain (60dB)
and could contribute
48 VDC
extra noise to your mix/
+
-
monitor bus.
EDI
The MicroDock
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1212m pci

Table of Contents