E-Mu 1616 PCI Owner's Manual page 104

6 - Appendix
Technical Specifications
Specifications: 1616 PCI System
CARD HEADPHONE AMP
Frequency Response:
THD+N:
SNR:
Dynamic Range:
Stereo Crosstalk:
Max Output Power:
Output Impedance:
TURNTABLE INPUT
Frequency Response:
Deviation from RIAA
THD+N:
SNR:
Stereo Crosstalk:
Maximum Level:
DIGITAL I/O
S/PDIF
ADAT
MIDI
SYNCHRONIZATION
Internal Crystal Sync:
RMS JITTER @ 44.1K
(Measured via Audio Precision 2)
104
+0.05/-0.0 dB, 20 Hz - 20 kHz
24 ohm load: -80 dB (0.01%)
65 ohm load: -85 dB (0.0056%)
600 ohm load: -96 dB (0.0016%)
116 dB (A-weighted, 22kHz BW)
116 dB (A-weighted, 22kHz BW)
-99 dB (1kHz at -1 dBFS, 660 ohm load)
50 mW (24Ω load)
22 ohms
RIAA equalized phono input
+/-0.5 dB, 50 Hz - 20 kHz
+0.2/-0.3 dB (50Hz to 15kHz)
-90 dB (.003%) (20kHz BW, unbalanced)
96 dB (A-wt, 20kHz BW)
< -80 dB (1kHz at -1 dBFS)
Professional: 60 mV RMS
Consumer: 15 mV RMS
• 2 in/2 out coaxial (transformer coupled)
• 2 in/2 out optical (software switchable with ADAT)
• AES/EBU or S/PDIF (switchable under software control)
• 8 channels, 24-bit @ 44.1/48 kHz
• 4 channels, 24-bit @ 96 kHz
• 2 channels, 24-bit @ 192 kHz
2 MIDI in, 2 MIDI out
44.1kHz, 48 kHz, 88.2kHz, 96 kHz, 176.4kHz, 192 kHz
ADAT, S/PDIF (optical or coaxial)
SRSync SourceRMS jitter in picoseconds
44.1 kHz internal Crystal 596ps
44.1 kHz Optical Input 795ps
Creative Professional