Open Session; Save Session; Session Settings; System Settings - E-Mu 1616 PCI Owner's Manual

4 - The PatchMix DSP Mixer
The Session
You can now select one of the factory template sessions. The factory templates are pre-
programmed with specific setups such as audio recording or mixing. The selector tabs
categorize Template Sessions into three groups based on sample rate, 44.1k/48k, 88k/
96k, or 176k/192k.
You can create your own templates by simply copying or saving sessions into the
"Session Templates" folder (Program Files\Creative Professional\E-MU PatchMix
DSP\Session Templates).
There is also a Comment area that you can use to give yourself some clue as to what you
were thinking when you created the session.
Selecting a Session at 176.4kHZ or 192kHz
When operating at 176.4k or 192k sample rates, the number of I/O channels are slightly
reduced. At these high sample rates you must select one of three types of sessions each
containing a different I/O configuration. Please see page 87 for details.

Open Session

To Open a saved session, click on the Open Session button. A dialog box appears
allowing you to choose one of your saved Sessions to open. Choose one of your saved
sessions and click on the Open button.

Save Session

To Save a session, click on the Save Session button. A Save dialog box appears allowing
you to choose a location in which to save the current Session. The "My Sessions" folder
is chosen by default.
Get in the habit of saving the session whenever you have created a special mixer setup.
This will make your life much easier as you can recall a setup for many different audio
modes such as: recording, mixing, special ASIO routings, etc.

Session Settings

System Settings

Pressing the Session Settings button on the toolbar brings up the System Settings
window shown below. Click the tabs to select System or I/O options.
E-MU PCI Digital Audio System 31