Table of Contents
Advertisement
Error recovery parameters defined in this page descriptor are applicable for the
following commands, except in cases where it is specifically pointed out.
•
READ
•
READ EXTENDED
•
READ LONG
•
SEND DIAGNOSTIC (Write/read test)
•
WRITE
•
WRITE AND VERIFY (Write operation)
•
WRITE EXTENDED
•
WRITE LONG
•
WRITE SAME
a.
AWRE (automatic write reallocation enabled)
"1": An "automatic alternate block allocation processing" operation is
"0": An "automatic alternate block allocation processing" operation is
Automatic alternate block allocation processing is explained in Section 6.3.2.
b.
ARRE (automatic read reallocation enable)
"1": An "automatic alternate block allocation processing" operation is
"0": An "automatic alternate block allocation processing" operation is
Automatic alternate block allocation processing is explained in Section 6.3.2.
C141-C013
specified during execution of a write operation.
prohibited during execution of a write operation.
specified during execution of a read operation.
prohibited during execution of a read operation.
5.1 Mode Parameters
283
Advertisement
Table of Contents
