Table of Contents
Advertisement
b.
Page length
This field indicates the length of the parameter field (number of bytes) from
byte 2, excluding the page header of that "Page descriptor." The HDD always
shows a value in this field which is the same as the length defined in that
"Page descriptor" regardless of the type of parameter requested in the "PC
(page control)" field of the CDB, and reports all the parameter fields that
"Page descriptor" in byte 2 and subsequent bytes.
c.
Parameter field
The parameter field in byte 2 and subsequent bytes, indicates parameter
values of the type (current values, variable values, default values or save
values) requested in the "PC (page control)" field of the CDB. See the
description of the MODE SELECT command (Chapter 5) concerning the
definition of each parameter, "Default" values and "Variable" values.
C141-C013
4.1 Control/Sense Commands
173
Advertisement
Table of Contents
