Table of Contents
Advertisement
Command Specifications
Sense Key
Additional sense code/
Additional sense code qualifier
"VALID" Bit
"ILI" bit
Information Field: ("Transfer byte length in the CDB) –
Remark: The calculation formula for the information field expresses 1 logical
Error recovery processing during execution of this command is performed in
accordance with the specifications in the MODE SELECT parameters (Page code
1: Read/Write Error Recovery Parameter, Page Code 21: Additional Error
Recovery Parameter, but the AWRE flag and DTE flag are not applied.
278
(Original "Transfer byte length")
data block as n physical sectors and n sub-sectors, and when negative,
as a complement of 2.
: 05 = ILLEGAL REQUEST
: 24-00 = Invalid field in CDB
: "1"
: "1"
C141-C013
Advertisement
Table of Contents
