Opening And Closing The System - Dell PowerEdge C6145 Hardware Owner's Manual

6 Installing a Processor" on page 124.
7 Remove the memory modules and transfer them to the same locations
on the new board. See "Removing the Memory Modules" on page 166
and "Installing the Memory Modules" on page 167.
8 Replace the air ducts. See "Installing the Air Duct" on page 117.
9 Connect the hard drive and power cables to the system board.
10 If applicable, install the SAS mezzanine card. See "Installing the SAS
Mezzanine Card" on page 153.
11 Install the expansion-card assembly. See Figure 3-11 on page 127.
12 Install the system-board assembly. See "Installing a System-Board
Assembly" on page 116.
13 Reconnect the system to its electrical outlet and turn on the system,
including any attached peripherals.

Opening and Closing the System

WARNING: Whenever you need to lift the system, get others to assist you. To
avoid injury, do not attempt to lift the system by yourself.
CAUTION: This system must be operated with the system cover installed to
ensure proper cooling.
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
Installing System Components | 173