Setting the items to display as properties
Set the simplified property display items to display on the left
side of a thumbnail.
1
Use the cursor buttons to align the cursor with the
"PROPERTY DISP." (➝ page 85) menu item.
2
Press the [SET] button to open the item menu.
All selected items are indicated by check marks.
3
Press the [SET] button to add a check mark for an
item you want to display.
Pressing the [SET] button adds a check mark to an un-
checked item and clears the check mark from a checked
item.
Note:
• Up to six items can be displayed simultaneously.
• When the sixth item has been selected, no other unchecked
item can be selected. Clearing the check mark from a
checked item allows you to select another item.
36
Main Mode: Thumbnail Screen
Playing Back Clips
Playback
2
1
Use the cursor buttons to align the cursor with the clip
you want to play.
2
Press the [PLAY]
Playback begins from the clip at the cursor position. After
the clip at the cursor position has been played, the subse-
quent clips are played back in order. When the last clip
has been played, the thumbnail screen reappears.
Note:
• To play back a clip, you do not need to select it (so that the
thumbnail appears inside a blue frame).
• You can change the thumbnail display settings to play back
clips only from specified slots or play back only clips with
text memos added.
• You can change the order that clips are played back.
1 Select the clips in the order you want them to be played
back.
2 Select [SELECTED CLIPS] in the "REPOSITION" (➝ page
82) menu item to switch the thumbnail display to only the
selected clips (in the order they were selected).
• Pressing the [PAUSE]
button displays the first frame of the clip as a still image.
• A clip whose clip number is red cannot be played back.
• Pressing the [REW]
button rewinds playback, while pressing the [FF]
fast forwards playback.
1
button.
button instead of the [PLAY]
button instead of the [PLAY]
button