Repeat Playback - Panasonic AJ-PD500P Operating Instructions Manual

Frame-by-frame playback
1
1
Press the [PAUSE]
and [STOP] button (when "STOP EE SEL" - "PB"
is set) to switch to still image mode.
2
Press the up or down cursor button.
• The up cursor button performs frame-by-frame playback
in the forward direction and the down cursor button per-
forms frame-by-frame playback in the backward direction.
• Holding down a cursor button performs continuous
frame-by-frame playback. To return to normal playback,
press the [PLAY] button.
One clip playback (ONE CLIP PLAY)
1
Assign the "ONE CLIP PLAY" function to a [USER]
button in the "USER BUTTON" menu.
(➝ Setup Menu "USER BUTTON" page 99)
2
Press the [PAUSE]
displayed or from the thumbnail display screen and
then press the [USER] button with "ONE CLIP PLAY"
assigned when in still image mode.
• Only the clip at the cursor position or current position is
played.
• Only STOP is enabled during this playback.
Note:
One clip playback is also performed when the [PLAY]
button is pressed while holding down the [SHIFT] button.
Clip and text memo forward/rewind
1
Switch to playback or a still image or other image dis-
play state.
2
Press the [PREV] button or [NEXT] button.
The clip beginning or text memo position is located in accor-
dance with the "SEEK POS SEL" (➝ page 87) menu item.
button, [SEARCH] button,
button while a thumbnail is

Repeat playback

Play back playable clips repeatedly.
1
2
Press [MENU].
2
Set the "REPEAT PLAY" (➝ page 86) menu item to
"ON."
3
Close the menu.
4
Press the [PLAY]
All clips are played repeatedly.
• Repeat playback continues until the [STOP]
is pressed.
• Repeat playback is not performed during playback other
than normal playback, for example, variable playback,
and playback stops at the beginning (BOS) or end (EOS)
of a playable clip.
• During repeat playback, "REPEAT PLAY" is displayed for
the operating status on the OSD.
Main Mode: Recording/Playback Screen
button to start playback.
button
31