Table of Contents
Advertisement
How to Turn On/Off the Power
Turning On the Power
From the power-off state, press the [
After startup, the
lamp lights green.
Note:
The following messages appear during startup.
• "STARTING SYSTEM...": Flashes during startup.
• "AUTO POWER OFF =
min": The time set in the "AUTO POWER OFF" (➝ page 91) menu item is displayed instead of " ." When
the menu item setting is set to OFF, this message is not displayed.
Turning Off the Power
From the power-on state, press the [
The
lamp flashes during the power-off process, and then turns off.
Auto Power Off during Operation
The unit has a function to automatically turn the power off after a short period of time if no operation such as recording, playback,
copying, or formatting is performed during that time. To resume operation after the power turns off automatically, turn the power
on again.
Note:
• The time until the power turns off can be set in the "AUTO POWER OFF" (➝ page 91) menu item.
20
Preparation: How to Turn On/Off the Power
Preparation
] button to turn on the power.
] button for at least two seconds to turn off the power.
[
] button
lamp
Advertisement
Table of Contents
