ZyXEL Communications P-2701RL User Manual page 9

In the Time Zone Setting screen, select Enable NTP Client Update if you want to
3
maintain the ZyXEL Device's internal clock by synchronizing it with a time server.
If you do this, choose a Time Zone and an NTP Server closest to your location
from their respective menus, then click Next to save your settings and go to the
next screen.
The WAN Interface Setting screen has different fields, depending on the type of
4
Internet access your ISP uses.
You can choose either Static IP, Dynamic IP, or PPPoE:
• Static IP means the ISP has assigned your Internet access account a single
IP address that will never change, regardless of whether you are online or
not. See
• Dynamic IP allows the ISP to randomly assign your ZyXEL Device an IP
address each time it requests a WAN (or Internet) session. The IP address is
released as soon as the ZyXEL Device disconnects from the ISP. See
2.2.2 on page 10
• PPPoE emulates a standard dial-up connection over the Internet and requires
that each time the ZyXEL Device requests a WAN session you log in with your
ISP-assigned user name and password. See
details.
Choose the setting required by your ISP then follow the instructions in the
appropriate section below. If you are not sure which setting to use then contact
your ISP.
P-27XX Series User's Guide
Section 2.2.1 on page 10
for details.
Chapter 2 Initial Configuration
for details.
Section 2.2.3 on page 10
Section
for
9