ZyXEL Communications P-2701RL User Manual page 15

The following table describes the labels in this screen.
Table 1 SIP Setting
LABEL
Active SIP
Account
Account
Name
Number
SIP Display
Name
SIP Server
Address
SIP Server
Port
SIP Service
Domain
Register
Expire (sec)
Outbound
Proxy Server
Outbound
Proxy
Address
Outbound
Proxy Port
Authentication
User Name
Password
Back
Apply
Reset
Advanced
P-27XX Series User's Guide
DESCRIPTION
Select this if you want the ZyXEL Device to use this account. Clear it if
you do not want the ZyXEL Device to use this account.
Enter a descriptive name for this SIP account. You can use up to 127
printable ASCII characters.
Enter your SIP number. In the full SIP URI, this is the part before the @
symbol. You can use up to 127 printable ASCII characters.
Enter the name that appears on the other party's device if they have
Caller ID enabled. You can use up to 127 printable ASCII characters.
Enter the IP address or domain name of the SIP server provided by
your VoIP service provider. You can use up to 95 printable ASCII
characters.
Enter the SIP server's listening port number, if your VoIP service
provider gave you one. Otherwise, keep the default value.
Enter the SIP service domain name. In the full SIP URI, this is the part
after the @ symbol. You can use up to 95 printable ASCII Extended set
characters.
Enter the maximum amount of alloted time for the ZyXEL Device to
attempt to register with the SIP server.
Select this if your VoIP service provider has a SIP outbound server to
handle voice calls. This allows the ZyXEL Device to work with any type
of NAT router and eliminates the need for STUN or a SIP ALG. Turn off
any SIP ALG on a NAT router in front of the ZyXEL Device to keep it
from re-translating the IP address (since this is already handled by the
outbound proxy server).
Enter the IP address or domain name of the SIP outbound proxy server,
if your VoIP service provider gave you one. You can use up to 95
printable ASCII characters.
Enter the SIP outbound proxy server's listening port number, if your
VoIP service provider gave you one.
Enter the user name for registering this SIP account, exactly as it was
given to you. You can use up to 127 printable ASCII characters.
Enter the password for registering this SIP account, exactly as it was
given to you. You can use up to 127 printable ASCII Extended set
characters.
Click to return to the previous screen without saving your changes.
Click to save your changes.
Click to restore your previously saved settings.
Click this to edit the advanced settings for this SIP account. The
Advanced SIP Settings screen appears.
Chapter 3 Phone Use and Configuration
15