19 Other Functions; Changing The Input And Output Channel Names - Yamaha O1V96 Owner's Manual

19 Other Functions

This chapter describes the 01V96's miscellaneous functions.

Changing the Input and Output Channel Names

You can change the default name of the input channels (Input Channels 1–32, ST IN Chan-
nels 1–4) and output channels (Aux Outs 1–8, Bus Outs 1–8, Stereo Out), if you desire.
Changing the Input Channel Names
1 Press the DISPLAY ACCESS [PATCH] button repeatedly until the Patch| In
Name page appears.
Channel IDs, Short names, and Long names are listed from left to right on the page. You
can specify Short names in the parameter boxes (
in the parameter boxes (
2 Move the cursor to the desired parameter box, then use the Parameter wheel
or the [INC]/[DEC] buttons to select a port for which you want to change
the name.
3 Press [ENTER].
The Title Edit window appears, which enables you to edit the name.
4 Edit the name, move the cursor to the OK button, then press [ENTER].
The new name is now effective.
Tip: The edited name is stored in the Input Patch library.
1
2
) in the right column.
Other Functions
3
1
) in the center column, and Long names
01V96 Version 2—Owner's Manual
229
2
19