Dual Pitch; Auto Pan - Yamaha O1V96 Owner's Manual

PHASER
Two input, two output 16-stage phaser.
Parameter Range
FREQ. 0.05–40.00 Hz Modulation speed
DEPTH 0–100% Modulation depth
Feedback gain (plus values for
normal-phase feedback, minus
FB. GAIN –99 to +99%
values for reverse-phase feed-
back)
Lowest phase-shifted frequency
OFFSET 0–100
offset
0.00–354.38 Left and right modulation phase
PHASE
degrees balance
2, 4, 6, 8, 10, 12,
STAGE Number of phase shift stages
14, 16
LSH F 21.2 Hz–8.00 kHz Low shelving filter frequency
LSH G –12.0 to +12.0 dB Low shelving filter gain
HSH F 50.0 Hz–16.0 kHz High shelving filter frequency
HSH G –12.0 to +12.0 dB High shelving filter gain
SYNC OFF, ON Tempo parameter sync on/off
Used in conjunction with
1
NOTE
TEMPO to determine FREQ.
1.

AUTO PAN

Two input, two output autopanner.
Parameter Range
FREQ. 0.05–40.00 Hz Modulation speed
DEPTH 0–100% Modulation depth
1
DIR. Panning direction
WAVE Sine, Tri, Square Modulation waveform
LSH F 21.2 Hz–8.00 kHz Low shelving filter frequency
LSH G –12.0 to +12.0 dB Low shelving filter gain
EQ F 100 Hz–8.00 kHz EQ (peaking type) frequency
EQ G –12.0 to +12.0 dB EQ (peaking type) gain
EQ Q 10.0–0.10 EQ (peaking type) bandwidth
HSH F 50.0 Hz–16.0 kHz High shelving filter frequency
HSH G –12.0 to +12.0 dB High shelving filter gain
SYNC OFF, ON Tempo parameter sync on/off
Used in conjunction with
2
NOTE
TEMPO to determine FREQ.
1. L<->R, L—>R, L<—R, Turn L, Turn R
2.
TREMOLO
Two input, two output tremolo effect
Parameter Range
FREQ. 0.05–40.00 Hz Modulation speed
DEPTH 0–100% Modulation depth
WAVE Sine, Tri, Square Modulation waveform
LSH F 21.2 Hz–8.00 kHz Low shelving filter frequency
LSH G –12.0 to +12.0 dB Low shelving filter gain
EQ F 100 Hz–8.00 kHz EQ (peaking type) frequency
EQ G –12.0 to +12.0 dB EQ (peaking type) gain
EQ Q 10.0–0.10 EQ (peaking type) bandwidth
HSH F 50.0 Hz–16.0 kHz High shelving filter frequency
HSH G –12.0 to +12.0 dB High shelving filter gain
SYNC OFF, ON Tempo parameter sync on/off
Used in conjunction with
1
NOTE
TEMPO to determine FREQ.
1.
HQ. PITCH
One input, two output high-quality pitch shifter
(Available for internal effects 1 and 2.).
Description
Parameter
PITCH
FINE
DELAY
FB. GAIN
MODE
SYNC
NOTE
1.

DUAL PITCH

Two input, two output pitch shifter.
Parameter
PITCH 1
FINE 1
Description LEVEL 1
PAN 1
DELAY 1
FB. G 1
PITCH 2
FINE 2
LEVEL 2
PAN 2
DELAY 2
FB. G 2
MODE
SYNC
.
NOTE 1
Description
NOTE 2
1.
Effects Parameters
Range
–12 to +12 semi-
Pitch shift
tones
–50 to +50 cents Pitch shift fine
0.0–1000.0 ms Delay time
Feedback gain (plus values for
normal-phase feedback, minus
–99 to +99%
values for reverse-phase feed-
back)
1–10 Pitch shift precision
OFF, ON Tempo parameter sync on/off
Used in conjunction with
1
TEMPO to determine DELAY
(Maximum value depends on the tempo setting)
Range
–24 to +24 semi-
Channel #1 pitch shift
tones
–50 to +50 cents Channel #1 pitch shift fine
Channel #1 level (plus values for
–100 to +100% normal phase, minus values for
reverse phase)
L63 to R63 Channel #1 pan
0.0–1000.0 ms Channel #1 delay time
Channel #1 feedback gain (plus
values for normal-phase feed-
–99 to +99%
back, minus values for
reverse-phase feedback)
–24 to +24 semi-
Channel #2 pitch shift
tones
–50 to +50 cents Channel #2 pitch shift fine
Channel #2 level (plus values for
–100 to +100% normal phase, minus values for
reverse phase)
L63 to R63 Channel #2 pan
0.0–1000.0 ms Channel #2 delay time
Channel #2 feedback gain (plus
values for normal-phase feed-
–99 to +99%
back, minus values for
reverse-phase feedback)
1–10 Pitch shift precision
OFF, ON Tempo parameter sync on/off
Used in conjunction with
1
TEMPO to determine Channel
#1 delay
Used in conjunction with
TEMPO to determine Channel
1
#2 delay
(Maximum value depends on the tempo setting)
01V96 Version 2—Owner's Manual
263
Description
Description