Table of Contents
Advertisement
Wall-mounted fan mode switch
Ball valves are a ship-loose accessory.
UNT-PRC001-EN
Controls
Manual Three-Speed Fan Switch
The manual three-speed fan switch is a simple four-position switch (OFF-HI-MED-LO)
which allows fan mode selection.
The fan switch is wall-mounted and controls the fan motor by line voltage.
Off: Fan is turned off.
Hi, Med, Lo: Fan runs continuously at the selected speed setting.
Ball Valves
Ball valves are available as ship-loose components with each unit:
Ball valves, also known as stop or end valves, allow waterflow into the unit to be cut off
for service purposes. These valves have a two-inch handle that rotates 90 degrees to a
fully open position. The valve body is cast brass, the ball is chrome plated brass, and
the seat is Teflon
™
. Ball valves are available as end valves for both the entering and
leaving water pipe of field-installed piping. Working pressure is 400 psi (2,758 kPa).
Ball Valve Material
Part
Material
Lever
Steel, zinc plated w/vinyl
Seat
Teflon
Stem Packing
Teflon
Stem
Rod Brass
G-Nut
Hex Brass
Ball
Brass, chrome plated
Retainer
Brass
Body
Cast Brass
Basic Series
Accessories
Spec ASTM
VTFE
RTFE
B16
B16
B16
B16
B584-C84
69
Hide quick links:
Advertisement
Table of Contents
